Graduating Lollipops
Supplies:
¼ pound Make’n Mold dark chocolate flavored candy wafers
¼ pound Make’n Mold milk chocolate flavored candy wafers
Make ’n Mold painter’s palette (5775)
Make’n Mold Smiley Face Grad Lollipop mold (0069)
12 Make ’n Mold 4½" lollipop sticks (5000)
6" foam ball
6" x 6" x 2" foam square
Yellow acrylic craft paint
Black acrylic craft paint
Black button with hook back
Tassel
Low temperature glue gun and glue sticks
Melt dark chocolate flavored wafers in painter’s palette, according to package instructions. Use brush from the painter’s palette to paint desired details in each cavity of the mold with melted dark chocolate flavored wafers. Chill 1-2 minutes.
Melt milk chocolate flavored wafers, according to package instructions. Fill remainder of each mold cavity with melted milk chocolate flavored wafers.
Insert lollipop sticks into stick channels of mold, with at least 1" of the stick inserted into the melted wafers. Rotate stick to completely cover the end with melted wafers. Chill 10-15 minutes.
Paint styrofoam ball yellow. Paint styrofoam square black. Dry 30 minutes. Once styrofoam square is dry, insert button into the center of the square. Attach tassel around the button and lay on one side of square.
Cut the styrofoam ball across the bottom so that it sits flat, then glue styrofoam square to top of styrofoam ball, at an angle. Once lollipops are finished and have reached room temperature, place into styrofoam ball and square, arranging as desired.
|