Coconut Truffles
SUPPLIES
8 ounces Make'n Mold Milk Chocolate Flavored Candy Wafers
2 ounces of Make'n Mold Toasted Coconut Stir-Ins
2 ounces (1/4 cup) Heavy Cream
Microwave safe dish
2 Make’n Mold Dipping Trays
Rubber Spatula
Plastic wrap
INSTRUCTIONS
Heat cream in dipping tray 10 seconds at a time until very hot but not boiling.
Meanwhile, place milk chocolate flavored candy wafers in microwave-safe dish.
Pour hot cream over wafers and alllow to set for 30 seconds.
Use rubber spatula to mix cream and wafers together.
If wafers are not melted completely, microwave for 30 seconds at a time until melted.
Place a layer of plastic wrap over the mixture and refrigerate for 1-2 hours or until firm.
Pour toasted coconut into second dipping tray.
Use a small scoop or 2 spoons to scoop truffles into 1" balls.
Once portioned, roll balls in toasted coconut to completely coat.
Keep refrigerated until ready to serve.
A Couple of Elegant Apples
SUPPLIES
1 pound Make ’n Mold vanilla Flavored Candy Wafers
1 pound Make 'n Mold Dark Chocolate Flavored Candy Wafers
Apples
Make ’n Mold Cookie Sticks
Make ’n Mold Mini Squeeze Bottle
Make 'n Mold Writer Caps
Waxed paper-lined Cookie Sheet
Toothpicks
INSTRUCTIONS
Insert cookie sticks into the core of each clean and COMPLETELY dry apple.
Melt vanilla candy wafers in a deep bowl, according to package instructions.
Dip all of the apples into the melted vanilla wafers, being sure they are completely covered with wafers. Remove apples from wafers, shaking off any excess wafers. Place on waxed paper-lined cookie sheet. Chill 10-15 minutes.
Melt dark chocolate flavored candy wafers in microwaveable tray according to package instructions. Dip half of each apple into the melted dark chocolate flavored wafers. To create the tuxedo, dip just the bottom of the apple into the melted dark chocolate flavored wafers, then tip the apple from side to side to create a V on the front of the apple.
Use a toothpick to paint dark chocolate flavored buttons and bow tie onto front of tuxedo apples.
Melt vanilla wafers in squeeze bottle according to package instructions. Attach fine tip writer cap.
Drizzle vanilla wafers in a criss-cross V across the front of the remaining vanilla coated apples. Dot 2 buttons at top of V with melted wafers. Chill 1-2 minutes..
Miniature Wedding Cake Favors
These miniature wedding cakes can be made with any color Make'n Mold candy wafers.
SUPPLIES
Make’n Mold vanilla Flavored Candy Wafers
Any Make'n Mold Colored Candy Wafers
Make'n Mold Wedding Cake mold
Make'n Mold Painter's Palette
Make'n Mold Small Clear Favor Bags
Make’n Mold Wedding Tags
2 Make'n Mold Microwaveable Trays
INSTRUCTIONS
Melt colored candy wafers separately in microwaveable trays according to package instructions. Use brushes from the painter's palette to paint the details in each wedding cake mold cavity with melted wafers. Chill 1-2 minutes.
Fill each mold cavity with either melted vanilla or melted pink candy wafers. Chill 10-15 minutes. Once candy pieces are finished and have reached room temperature, place in treat bags. Secure bags with tags (twist ties included with tags).
Bridal Berries
SUPPLIES
1 pound Make'n Mold vanilla Flavored Candy Wafers
1 pound Make'n Mold Dark Chocolate Flavored Candy Wafers
4 pints strawberries
Make’n Mold Microwaveable Trays
Make’n Mold Mini Squeeze Bottle
Make'n Mold Writer Caps
Waxed paper-lined cookie sheet
Toothpicks
INSTRUCTIONS
Melt vanilla candy wafers in a microwaveable tray, according to package instructions.
Holding strawberries by the stem, dip each one into melted vanilla wafers, covering it up to the stem. Place on waxed paper-lined cookie sheet. Chill 10-15 minutes.
Melt dark chocolate flavored candy wafers in microwaveable tray according to package instructions. Dip half of the strawberries a quarter way into melted dark chocolate flavored wafers turning berry from side to side to create a V in the front. Place on waxed paper-lined cookie sheet. Chill 10-15 minutes.
Use a toothpick to paint dark chocolate flavored buttons and bow tie onto front of tuxedo berries.
Melt vanilla wafers in squeeze bottle according to package instructions. Attach fine tip writer cap.
Drizzle vanilla wafers in a criss-cross V across front of bride berries. Dot 2 buttons at top of V with melted wafers.
Bride and Groom Decorated Cookies
SUPPLIES
1 pound Make’n Mold vanilla Flavored Candy Wafers
1 pound Make'n Mold Dark Chocolate flavored Candy Wafers
Chocolate sandwich cookies
Make’n Mold Microwaveable Trays
Make’n Mold Mini Squeeze Bottle
Make'n Mold Writer Caps
Waxed paper-lined cookie sheet
Toothpicks
INSTRUCTIONS
Melt vanilla candy wafers in a microwaveable tray, according to package instructions.
Dip all cookies into the melted vanilla wafers, being sure that it is completely covered. Use a fork to remove each cookie from the melted wafers, shaking off any excess wafers. Place on waxed paper-lined cookie sheet. Chill 10-15 minutes.
Melt dark chocolate flavored candy wafers in microwaveable tray according to package instructions. Dip half of the cookies into the melted dark chocolate flavored wafers. To create the tuxedo, dip the cookies on their side twisting just a little at one corner. Then dip the other side of the cookie into the melted wafers sideways, twisting a little at the bottom corner. Cookies should appear to have a V of chocolate flavored wafers on the front.
Use a toothpick to paint dark chocolate flavored buttons and bow tie onto front of tuxedo cookies.
Melt vanilla wafers in squeeze bottle according to package instructions. Attach fine tip writer cap.
Drizzle vanilla wafers in a criss-cross V across front of the remaining vanilla coated cookies. Dot 2 buttons at top of V with melted wafers. Chill 1-2 minutes.
Thank You Lollipop Pots
SUPPLIES
Make’n Mold Milk Chocolate Flavored Candy Wafers
Any Make'n Mold colored candy wafers
Make'n Mold Thank You Lollipop mold
Make'n Mold Painter's Palette
Make'n Mold Small Clear Favor Bags
Make’n Mold Wedding Tags
ChocoMaker Candy Melter OR Make'n Mold Microwaveable Trays
Curly ribbon
2" Clay Pot
Styrofoam to fit inside the 2" Clay Pot
White acrylic craft paint
Shiny Excelsior or Metallic Shred
INSTRUCTIONS
Paint clay pot white. Dry at least 30 minutes.
Meanwhile, melt colored candy wafers in painter's palette according to package instructions. Use brushes from painter's palette to paint the details/words in each mold cavity with melted wafers. Chill 1-2 minutes.
Melt milk chocolate flavored candy wafers according to package instructions. Fill each mold cavity with melted chocolate flavored candy wafers.
Insert lollipop sticks into the stick cavity in the candy mold. Rotate the stick so that at least 1" of the top of the stick becomes covered with melted wafers.
Chill 10-15 minutes.
Once clay pot is dry, place styrofoam into pot and cover with metallic shred.
Once candy pieces are finished and have reached room temperature, place in treat bags. Secure bags with tags (twist ties included with tags). Insert lollipop sticks into the clay pot.
Decorate clay pot with the curly ribbon.
Wedding Vow Favors
SUPPLIES
Make’n Mold vanilla Flavored Candy Wafers
Any Make'n Mold Colored Candy Wafers
Make'n Mold Wedding Vow Mini mold
Any solid color decorative plate
INSTRUCTIONS
Melt colored candy wafers according to package instructions. Use toothpicks to paint the details/words in each mold cavity with melted wafers. Chill 1-2 minutes.
Melt vanilla candy wafers according to package instructions. Fill each mold cavity with melted vanilla candy wafers. Chill 10-15 minutes.
Once candy pieces are finished and have reached room temperature, place one of each vow on the decorative plate.
|